30g Surface Tissue

Applications

Standard Applications

When combined with fibreglass laminate, surface tissue is used in projects that require a smoother, more consistent finish.

For the most part, classic, well-practised examples include:

• Pond linings and water feature linings
• Boat, yacht and other marine vessel repairs
• Fibreglass mould making and laminating
• General fibreglass repairs

Substrate Application

30-gram surface tissue should be applied to consolidated fibreglass laminate with a paddle roller. Compatible with Resin Library’s polyester resin as well as 450-gram and 600-gram CSM glass fibre.

Resin Library’s Polyester Resin provides a good degree of glass fibre wetting, so ‘wet-lay-up’ or open lamination can be performed as a means to drive out air bubbles which add structural defects in many composites.

Ensuring Correct Application

Inexperienced users should follow our guidelines and videos. Best results necessitate correct resin-glass fibre CSM quantities, correct laminating procedures and optimal working environments. Work and curing should be performed under warm, dry conditions. This can be achieved by planning and practice.

Instructional videos are also available.

Key Processing Information

• Suitability: professional, DIY and hobby usage
• Odour: none
• Safety Precautions
o Wear PPE: gloves, goggles and if working with resin, a mask unless working in a well-ventilated area. Use protective gloves when handling.
o Read the MSDS in advance, plan ahead.
• Recommended working conditions: dry, ambient conditions (15 – 30 oC)
• Can be used from 15 to 30°C provided the atmosphere and surfaces is dry
• Resin to 600 g CSM ratio: 1.5 kg of catalysed polyester resin prior to application.

Application

• Measure dimensions of the area for coverage in advance. Cut to size using a Stanley knife. Surface tissue should be 10% above the desired surface area to accommodate trimming and ensure complete coverage.

Storage

• Unopened shelf life minimum of 12 months.
• Store at 2 – 20 oC in a clean, dark environment sealed inside an air-tight bag.
• Avoid moisture and other contaminants (liquids and particulates).
• Once opened, immediately seal after use. Use within 3 months

Safety

• Utilise protective gloves to avoid splintering when handling.
• Consider polyester resin safety recommendations when laminating.

Quality

Resin Library’s polyester resin is manufactured in the UK in an ISO9001 compliant environment. It is used by leading fibreglass roofing brands and is a high-performance ingredient in many fibreglass applications.